beautypg.com

Paradyne 3810 User Manual

Page 152

background image

COMSPHERE 3800 Series Modems

14-18

November 1996

3810-A2-GB30-20

Table 14-2

(3 of 11)

3800 Series S-Registers

S-Register

Front Panel Branch

Description

S35

Auto Redial (Leased Line)
Auto Redial allows repeated automatic dial backup attempts by
specifying the range of Directory Locations that can be tried. A redial
attempt is made in response to a bad phone number, a busy signal, no
answer, or no quiet answer. The modem must be in Originate mode.

On leased lines with dial backup, Auto Redial works in conjunction with
the Bad Lines Auto Originate and Rate Auto Originate options.

Register has the following values:

S35 = 0

Use Directory Location 1

S35 = 1

Use Directory Locations 1–2

S35 = 2

Use Directory Locations 1–3

S35 = 3

Use Directory Locations 1–4

S

S

S

S

S

S

S35 = 9

Use Directory Locations 1–10

NOTE: The modem must be in Originate mode to perform an automatic

dial backup.

Configure\Edit\Leased Line
(Auto Redial)

S36

Rate Auto Originate
Initiates a dial backup call, using the phone number in directory
location 1, when the leased-line rate of the modem falls back to or below
a certain speed.

Register has the following values:

S36 = 0

Disable

S36 = 1

On fallback to 4800

S36 = 2

On fallback to 7200

S36 = 3

On fallback to 9600

S36 = 4

On fallback to 12,000

S36 = 5

On fallback to 14,400

S36 = 6

On fallback to 16,800

NOTE: Rate Auto-Originate is valid only when V.32bis Autorate is

enabled (S76 = 0).

Configure\Edit\Leased Line

S37

Auto Redial (DTR)
Auto Redial allows repeated automatic dial backup attempts by
specifying the range of Directory Locations that can be tried. A redial
attempt is made in response to a bad phone number, a busy signal, no
answer, or no quiet answer. The modem must be in Originate mode.

When DTE Dialer Type is DTR=Dirs, Auto Redial works in conjunction
with the DTR Cont Repeat (S38) configuration option.

Register has the following values:

S37 = 0

Use Directory Location 1

S37 = 1

Use Directory Locations 1–2

S37 = 2

Use Directory Locations 1–3

S37 = 3

Use Directory Locations 1–4

S

S

S

S

S

S

S37 = 9

Use Directory Locations 1–10

NOTE: The modem must be in Originate mode to perform an automatic

dial backup.

Configure\Edit\Line_Dialer
(DTR Auto Redial)