Paradyne 7612 SNMP DSU - Manual (Page 95)

MIB Descriptions
C-9 7612-A2-GB20-10 November 1997
Table C-5. Interface Test Group Objects (2 of 2)
Object Setting/Contents Description
ifTestCode
(ifTestEntry 5) Contains a code which is
more specific about the test
results. Supports the following values:
H none (ifTestCode 1) – No further
information is available. Used for
send pattern/code and loopback tests.
H inSyncNoBitErrors (ifTestCode 2) –
A 511 monitor pattern test has
synchronized on the pattern and has
not detected any bit errors.
H inSyncWithBitErrors
(ifTestCode 3) – A 511 monitor pattern
test has synchronized on the pattern
and has detected bit errors.
H notInSync (ifTestCode 4) – A 511
monitor test pattern has not
synchronized on the requested
pattern.
ifTestOwner
(ifTestEntry 6) Used by an SNMP
Manager to identify the
current owner of the test for
the interface. The SNMP Manager sets the object to
its IP address when setting ifTestID and
ifTestStatus.
Generic Receive Address Table
Not supported by the unit.