Switching to the screen function key area, Switching to the, Screen function key area – Paradyne 7612 SNMP DSU User Manual

Page 20: Procedure

Using the ASCII Terminal Interface

2-7

7612-A2-GB20-10

November 1997

Switching to the Screen Function Key Area

Selecting Ctrl-a allows you to switch between the two screen work areas to
perform all screen functions.

Procedure

To access the screen function area below the dotted line:

1. Press Ctrl-a to switch from the screen area to the screen function key area

below the dotted line. The available selections for the first input field appear
on the last line as shown below.

2. Select either the function’s designated (underlined) character or press the tab

key until you reach the desired function key.

Example:
To save the changes you have made on this screen, enter s or S ( Save ).

3. Press Return. The function is performed.

4. To return to the screen area above the dotted line, press Ctrl-a again.

ООООООООООООООООООООООООО

main/configuration/edit/term

Device Name: Node A

Model: 7612

TERMINAL PORT OPTIONS

Data Rate (Kbps):

9.6

Character Length:

Parity:

None

Stop Bits:

Monitor DTR:

Enable

Port Access Level:

Level 1

Inactivity Timeout:

Enable

Disconnect Time(minutes):

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save