Paradyne 7612 SNMP DSU - Manual (Page 13)

About the DSU
1-4 7612-A2-GB20-10 November 1997
SNMP Management Capabilities
The DSU supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external SNMP
managers.
Management Information Base (MIB) Support
The following MIBs are supported:
H
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the DSU. MIB II is backward-compatible with MIB I.
H
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
H Ethernet-like MIB (RFC 1643) – Defines objects for managing Ethernet-like
interfaces (e.g., 10BaseT).
H
Enterprise MIB – Supports configuration, status, statistics, and tests.
Rear Panel Interface Connections
The following illustration shows the physical interfaces of the DSU. Information
about the installation of the DSU is contained in the
Model 7612 SNMP DSU with
Internal Ethernet LAN Adapter Startup Instructions.
D
T
E
TERMINAL
NETWORK
POWER
LAN
Modem
Terminal
or
497-15272
DTE
Power
10BaseT
Network