Index
IN-2
7612-A2-GB20-10
November 1997
DTE test, 7-5
DTR
action, A-9
data terminal ready LED, 6-5
monitoring, A-11
E
effective access
and screen contents, 2-3
to ATI, 4-3
EIA-232 pin assignments, E-2
Enterprise MIB
objects supported, C-17
SNMP traps, D-3
Ethernet cable, E-6
Ethernet port
connector, E-6
default gateway address, A-10
IP address, A-9
IP subnet mask, A-10
options, A-9
Use, A-9
Ethernet-Like MIB
objects not supported, C-17
objects supported, C-17
external device, access, 4-1
F
factory defaults, for configuration options, 3-4
features, 1-1
G
glossary, GL-1–GL-4
H
health and status, messages, 6-6
I
identity, 3-1
IMC
access, 4-1
IP address, A-6
rate, A-5
remote management, 1-1
Routing Information Protocol, A-6
subnet connection, 5-2
subnet mask, A-6
Inactivity Timeout, A-12
installing rear connectors.
See Startup Instructions
interface
connections, 1-4
network status, 6-10
invert transmit clock, A-7
IP address
Ethernet port, A-9
IMC, A-6
NMS, A-16
scheme, 5-1
SNMP manager, 4-6
trap manager, A-17
IP interfaces, 4-1, 5-2
K
keyboard functions, 2-5
L
LADS
connection distances, F-3
line rate, A-3
operating mode, A-2
timing, A-3
lamp test, 7-6
LAN adapter, addressing, 5-1
LAN cable, E-6
LEDs, 6-2
link-layer protocols, 5-1
login
required for Terminal port, A-11
required for Telnet session, A-13
