Lexmark 9300 Series - Manual (Page 110)

Using Bluetooth technology
Bluetooth is a wireless technology that lets compatible products send and receive communication. The printer
communicates with Bluetooth-enabled devices through a Universal Serial Bus (USB) Bluetooth adapter, which is sold
separately.
Inserting a Bluetooth adapter
1 Insert the Bluetooth adapter into the PictBridge port the front of the printer.
MS XD SD/M MC CF/M D
PictBrid ge
Note: A converter cable may be necessary if your Bluetooth adapter does not fit directly into the port.
2 Wait for the printer to recognize that a Bluetooth adapter is inserted. The message Bluetooth Connected.
Refer to Bluetooth device owners’ manual for further information. appears.
3 If the printer does not read the Bluetooth adapter, remove and reinsert it.
Warning: Do not touch cables, the Bluetooth adapter, or the printer in the area shown while actively printing from
the Bluetooth-enabled device. A loss of data can occur. Also, do not remove the Bluetooth adapter while actively
printing from the Bluetooth-enabled device.
MS XD SD/M MC CF/M D
PictBr idge
Note: The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
Setting the Bluetooth mode
1 From the control panel, press or repeatedly until Setup is highlighted.
2 Press .
3 Press or repeatedly until you reach the Change Bluetooth Default Settings submenu.
4 Press .
5 Press or repeatedly until you reach Bluetooth Enable.
110