Copying, Making a copy, Copying photos – Lexmark 5300 Series User Manual
Page 82: If you want to change a setting

Copying
Making a copy
1
Load paper.
2
Load an original document facedown on the scanner glass.
3
From the control panel, press Copy Mode.
4
Press Start Color or Start Black.
If you want to change a setting
1
From the control panel, press .
2
Press or repeatedly until the menu item you want appears, and then press .
3
Press or repeatedly until the submenu item or the setting you want appears, and then press .
4
To go into additional submenus and settings, repeat as needed.
5
If needed, press
repeatedly to return to the previous menus and make other setting selections.
6
Press Start Color or Start Black.
Copying photos
1
Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.)
2
Place a photo facedown on the scanner glass in the upper left corner. For more information, see “Loading original
documents on the scanner glass” on page 52.
3
If necessary, press Copy Mode.
4
Press .
5
Press or repeatedly until Quality appears.
6
Press
.
7
Press or repeatedly until Photo appears.
8
Press
.
9
Press or repeatedly until Paper Size appears.
10
Press
.
11
Press or repeatedly until the size you want appears.
12
Press
.
13
Press or repeatedly until Original Size appears.
14
Press
.
Copying
82