Checking the spool settings for banner printing, Resolving font problems, Printer is busy printing another job – Lexmark 5300 Series User Manual
Page 138: Resolving font problems h
D
O
THE
CARTRIDGES
HAVE
INK
?
1
Click Programs or All Programs Lexmark 5300 Series.
2
Click Solution Center.
If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge.
For more information, see “Installing print cartridges.”
I
S
THERE
A
PROBLEM
WITH
THE
CONNECTIONS
?
For more information, see “Cable is not connected, is loose, or is damaged.”
Checking the Spool Settings for banner printing
Banner printing is not possible if certain Spool Settings are selected. Verify that you have the right settings selected.
1
Click Start Settings Printers or Printers and Faxes.
2
Right-click the Lexmark 5300 Series icon.
3
Select Properties.
4
Click the Advanced tab.
5
At the bottom of the Advanced tab, click Print Processor.
6
Verify that the Default data type is LEMF. If it is not, select LEMF from the available choices, and then click OK.
Resolving font problems
H
AVE
YOU
APPLIED
THE
FONTS
CORRECTLY
IN
THE
PROGRAM
?
Most programs do not print a stretched or resized font.
I
S
THE
FONT
A
T
RUE
T
YPE
FONT
? I
S
IT
AVAILABLE
ON
THE
COMPUTER
?
The font you are trying to print may not be available in the program font selection box. Not all fonts are designed
to be printed; make sure the font is a TrueType font. See the program documentation for more information.
W
AS
THE
DOCUMENT
FORMATTED
OR
CREATED
FOR
THE
PRINTER
?
Windows may substitute different fonts. Line and page breaks may change with the font. Use the program that
created the document to fix these problems, and then save the changes for the next time you print.
Printer is busy printing another job
Wait until the printer has finished printing all other print jobs before sending this job to print.
Troubleshooting
138