Diag-line, Diag-line -52 – Kentrox AI232 User Manual
Page 224
AI232 Version 9.6x User’s Guide
AI232 Commands: diag-line
8-52
diag-line
Description
This command monitors incoming and outgoing asynchronous traffic and displays
diagnostic information for the traffic. A help screen provides a list of commands
available for line monitoring diagnostics.
CAUTION: The line monitor degrades the performance of AI232. Do not use this
command in heavy traffic situations in which performance is crucial.
Note: Information from the line monitor diagnostic mode only appears when data is
passed on serial links. If no data is passed, the screen is blank.
displays the line monitor mode options that can be entered after
diag-line
is entered.
Table 8-2 Line Monitor Mode Options
Option
Function
data
Toggles the display of data on or off.
modem
Toggles the display of modem signals on or off.
t
Toggles the display of a timestamp for each frame of data
displayed on or off.
h
or
r
Hides (
h
) or reveals (
r
) all lines on AI232.
h lx
or
r lx
Hides (
h
) or reveals (
r
) a specified line (
x
).
r l
x y
Reveals a specified LCN (
y
) on a specified line (
x
).
r l
x y z
Reveals a range of specified LCNs (
y
through
z
) on a
specified line (
x
).
h
l
x
y
- or
r
l
x
y
-
Hides or reveals all LCNs from a specified LCN (
y
) on up on a
specified line (
x
).
h
l
x
-
y
or
r
l
x
-
y
Hides or reveals all LCNs from 0 to a specified LCN (
y
) on a
specified line (
x
).
filterL2
Toggles the filtering of level 2 frames without packet
information on or off.