Kentrox AI232 - Manual (Page 138)

AI232 Version 9.6x User’s Guide
TID Multiplexing: TID Multiplexing Configuration
6-10
4. For Alias name , enter:
parent_name . m
5. If you are using single alias translation, for Destination , enter the IP address of
AI232. By entering a destination value, you are specifying the use of single alias
translation.
6. For Called address , enter the called address.
7. For Caller's address , enter the caller's address.
8. For Call Data , enter the call data information.
9. For Application String , enter:
TID: tid
10. (optional) For Called protocol , enter the called protocol.
11. For Caller's protocol , enter ="" .
12. Save your changes.
Example Configurations
The following screens display parent and child alias configurations that do the
following:
1. A call comes in on alias 172.16.30.61 at port 6001 ( 172.16.30.61#6001 ).
2. The call fans out into two children calls. 09 App. string in the parent alias
configuration determines the number of children; in this case, it is noted by TMUX2 .
The children have the following names: PARENT1.1 and PARENT1.2 . These names are
established through 08 Call data in the parent alias configuration. The calls to the
first and second child are PVCs.
3. AI232 forwards all TL1 commands with TIDs NE-OH-COLUMBUS-1 , NE-OH-COLUMBUS-2 ,
and NE-OH-COLUMBUS-3 through the first child connection. It forwards all TL1
commands with TIDs NE-OH-WORTHINGTON-1 and NE-OH-WORTHINGTON-2 through the
second child connection.
parent_name Defines the name you entered for 08 Call data during the parent
alias configuration.
m Defines the child number. Valid values are 1 to n (specified
during the parent alias configuration).
tid Defines the TID of the destination NE. Maximum length is 20 characters.