Konica Minolta bizhub 750 - Manual (Page 98)

Before Making Copies 2
bizhub 750/600 2-53
Before Making C
o
pies
Chapter 2
2
Reminder
Be sure to insert the trailing-edge guide at the position for the specified
size. If there is space between the trailing-edge guide and the paper, the
paper will not be fed correctly.
Make sure that the lateral guide is correctly positioned against the edge
of the loaded paper. If the lateral guide is not positioned correctly, the pa-
per size will not be correctly detected.
Do not close the paper tray with too much force, otherwise the weight of
the tray and paper will apply an impact to the machine that may cause
damage.
When Thick Paper Is Loaded Into a Paper Tray
If thick paper is loaded into a paper tray, the bypass tray or the LCT, the con-
veyance lever must be correctly set in order to prevent paper misfeeds.
To set the conveyance lever
1
Open the front doors (left and right).
2
Turn lever M4 to the left, and then pull out the ADU unit.
Lever M4