Konica Minolta bizhub 750 - Manual (Page 444)

Utility 12
bizhub 750/600 12-31
Utility
Ch
ap
te
r 12
!
Detail
When PK-505 and ZU-602 are installed, adjustments can be made using
both the “Punch Adjustment” and “Z-Fold Position Adjustment” param-
eters. Contact your technical representative.
List/Counter
LCD Backlight Setting
Standard Size Setting
Scanner
Adjust-
ment Leading
Edge Ad-
justment The starting scanning position (document feed direction) of the doc-
ument can be adjusted. For details on making this adjustment, con-
tact your technical representative.
Centering The starting scanning position (transverse document feed direction)
of the document can be adjusted. For details on making this adjust-
ment, contact your technical representative.
Vertical
Adjust-
ment If the copy image is distorted (stretched or compressed), the zoom
ratio in the document feed direction for the scanner can be adjusted.
For details on making this adjustment, contact your technical repre-
sentative.
ADF Centering If the center position cannot be automatically adjusted in the trans-
verse document feed direction, it can be adjusted manually. For de-
tails on making this adjustment, contact your technical
representative.
Parameter Description Settings (Default set-
tings are underlined.)
Parameter Description
Management List Job Settings List The machine settings can be printed.
Paper Size/Type Counter Store up to 9 combinations of paper sizes
and paper types to be counted.
Description Settings (Default settings are underlined.)
Adjust the brightness of the touch panel back-
light to one of 16 levels. 1 to 16: 8
Parameter Description Settings (Default
settings are under-
lined.)
Original Glass Original Size Detect Specify the paper standards for
detecting paper from the original
glass. AB series/ Inch series/
A series/ Full size
ADF Original Size Detect Specify the paper standards for
detecting paper in the ADF.