Konica Minolta bizhub 750 - Manual (Page 518)

Appendix 13
bizhub 750/600 13-11
Appendix
Ch
apt
e
r 13
Function combination code keys
o :
The functions can be combined.
, : The functions cannot be combined. The function set last has priority.
: The functions cannot be combined. The function set first has priority. A warning message will appear.
: The functions cannot be combined. The function set first has priority. No warning message will ap-
pear, or other functions will not be available after the first function is selected.
—: The functions cannot be combined.
The functions cannot be combined. A warning message will appear.
If non-standard-sized original pages are combined, a warning message appears.
The specified binding margin width is the binding margin width at the center of the page.
If the “Auto Zoom for Combine/Booklet” function was set to “Auto Display Zoom Ratio”, these set-
tings cannot be combined. The setting specified last is given priority. If “OFF” was selected, the set-
tings can be combined.
If the “Book Copy” function is specified, the “Non-Image Area Erase” function and “Centering” set-
ting are automatically specified. If they are unnecessary, they can be canceled.
If the number of copies is set to “1”, the “Offset” setting can be selected, but it is not applied.
In order to scan the original placed on the original glass, the “Z-Folded Original” setting is not ap-
plied.
If a copy program is recalled, copies are produced with the currently selected paper tray setting.
If the paper size that is selected is not compatible with the Staple or Punch settings, the settings can-
not be combined.
If PK-505 was installed and a function that uses paper from multiple paper trays is set at the same
time as a Punch setting, a warning message may appear and the settings cannot be specified. For
details, contact your technical representative.
The settings can be combined if “None” is selected under “Chapter Paper”.
The settings cannot be combined if “Copy Insert” is selected under “Chapter Paper”.
If the “Chapters” function is specified first, a warning message appears.
If the “Tri-Fold Printed Side Selection” parameter is set to “Outside” and the cover sheet feeder PI-
501 is selected for “Back Cover Paper” of the “Cover Mode” function, these settings cannot be com-
bined.
The setting specified first is given priority, and a warning message appears.
If the “Tri-Fold Printed Side Selection” parameter is set to “Inside”, the settings cannot be combined
under the following conditions. The setting specified first is given priority, and a warning message
appears.
• When an optional paper tray is selected for “Front Cover Paper” or “Back Cover Paper” of the
“Cover Mode” function
• When a Combine Originals setting is selected
• When the “Booklet” function is specified
• When the “Image Repeat” function is specified
The “Mixed Original” setting and “Group” setting can be combined; however, they cannot be com-
bined if a Staple setting is also selected.
If the cover sheet is thick paper and the paper for the body text is plain paper while using the “Cover
Mode” function, a Staple setting can also be selected.
In any other case, the settings cannot be combined, the setting specified first is given priority, and a
warning message appears.