Konica Minolta bizhub 750 - Manual (Page 216)

Troubleshooting 5
bizhub 750/600 5-5
T
roubleshooting
Chap
ter 5
5.2 When the Message “Misfeed detected.” Appears
If a misfeed occurs during copying or printing, the message “Misfeed detect-
ed.” appears and the location of the misfeed is indicated in the screen. (mis-
feed screen)
At this time, copying and printing cannot continue until the misfeed is ade-
quately cleared.
If paper misfeeds have occurred at multiple locations, multiple “
o” and ar-
rows appear or flash. The flashing “
o” and arrow indicate locations where
the paper misfeed should be cleared first. Clear the paper misfeeds accord-
ing to the messages that appear in the guidance display area.
2
Note
The illustration above shows all “
o” and arrows displayed; however, nor-
mally, all marks will not appear.
Error codes may appear in the illustration description area of the JAM lo-
cation display screen. For details, contact your technical representative.
Illustration button
Touch this button to display a screen that
contains illustrations describing the
recommended procedure for clearing the
paper misfeed.
Guidance display area
Displays the basic procedures for
clearing paper misfeeds. Illustration description area
indicates the location of the paper
misfeed, and the arrow indicates the
operation for clearing the misfeed.