Konica Minolta bizhub 750 - Manual (Page 6)

Introduction
bizhub 750/600 x-5
Control Panel ............................................................................... 2-14
Basic Settings Screen (Basic Screen) .......................................... 2-17
Icons That Appear in the Touch Panel ......................................... 2-18
2.2 Adjusting the Angle of the Control Panel ..................................... 2-20
To adjust the angle of the control panel ...................................... 2-20
2.3 Turning on the Main Power and the Sub Power .......................... 2-22
To turn on the machine ................................................................ 2-22
To scan during warm-up .............................................................. 2-24
To turn off the machine ................................................................ 2-26
Automatically Canceling the Settings (Automatic Panel Reset) ... 2-27
Automatically Canceling the Mode Screen
(Automatic System Reset) ............................................................ 2-27
Automatically Conserving Energy (Low Power Mode) ................. 2-28
Automatically Conserving Energy (Sleep Mode) .......................... 2-29
Manually Conserving Energy ....................................................... 2-30
Limiting Machine Usage According to a Schedule
(Weekly Timer) .............................................................................. 2-31
Controlling the Use of This Machine With User Authentication ... 2-33
Using the Machine With Account Track ....................................... 2-36
2.4 Loading Paper Into the Tray 1 or 2 ................................................ 2-39
To load paper (tray 1 or 2) ............................................................ 2-39
2.5 Loading Paper Into the Tray 3 or 4 ............................................... 2-41
To load paper (tray 3 or 4) ............................................................ 2-41
2.6 Loading Paper Into the Bypass Tray ............................................. 2-44
To load paper (bypass tray) ......................................................... 2-44
2.7 Loading Paper Into the LCT (LU-401/LU-402) .............................. 2-48
To load paper (LCT) ..................................................................... 2-48
2.8 Loading Paper of a Different Size Into Paper Trays .................... 2-51
Changing the Size of Paper That Is Loaded ................................ 2-51
When Thick Paper Is Loaded Into a Paper Tray .......................... 2-53
To set the conveyance lever ........................................................ 2-53
3 Basic Copy Operations
3.1 General Copy Operation .................................................................. 3-2
To make a copy ............................................................................. 3-2
3.2 Operations That Cannot Be Combined .......................................... 3-5
Operations where the setting specified last is given priority ......... 3-5
Operations where the setting specified first is given priority ......... 3-6
3.3 Positioning the Original .................................................................... 3-7
To position the original into the ADF .............................................. 3-7
To position the original on the original glass ................................. 3-9