Konica Minolta bizhub 750 - Manual (Page 465)

12 Utility
12-52 bizhub 750/600
Utility
Ch
ap
te
r 12
Adjusting the Hole-Punching Positions (Punch Horizontal Position)
When PK-505 is installed, the horizontal position of the punched holes can
be adjusted.
0 Use the “Punch” function to print a single sample copy, and then perform
the adjustment while checking the sample that was created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting Screen” on page 12-39.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [3 Punch Adjustment].
The Punch Adjustment screen appears.
6
Touch [2 Punch Horizontal Position].
The Punch Horizontal Position screen appears.