Konica Minolta bizhub 750 - Manual (Page 337)

8 Application Functions
8-64 bizhub 750/600
Application F
unctions
Chapter 8
4
Select the desired Image Adjustment setting.
– The factory default setting is [Auto Detect].
– To cancel changes to the settings, touch [Cancel].
– To cancel a setting touch the button for a setting different from the
currently selected setting.
5
Check the original size under “Original Size”.
– When the original is loaded into the ADF, the original size is auto-
matically detected when the [Start] key is pressed.
– If the original size does not appear under “Original Size” or to spec-
ify the original size, touch [Standard Size], and then specify the orig-
inal size from any of the screens.
– If a value outside the allowable range is specified, the message “In-
put Error” appears. If “Input Error” appeared or if the distance was
incorrectly entered, press the [C] (clear) key to erase the value, and
then specify the correct value.