Kodak 7520 - Manual (Page 97)

A-61140 January 2000 8-23
Using the Patch Reader
The Kodak Digital Science Patch Reader controls document level
changes by automatically sensing a pre-defined patch code and
changing the document level accordingly.
During installation, modes are defined for use with specific applications.
Patch reading may be enabled or disabled for each mode.
Patch types During installation, the patch type(s) used are defined for each mode.
The Patch Reader is capable of reading three types of patches.
Patch III — assigns a Level 3 to the current document.
Patch II — assigns a Level 2 to the current document.
Patch T/Transfer Patch — assigns a predetermined level to the next
document.
The Transfer Patch Definition is also defined at installation. The
Transfer Patch Definition controls the level assigned to the next
document when a Transfer Patch is used. For example, if the Transfer
Patch Definition for the current mode is defined as Level 3 and a
Transfer Patch is used, the next document will be assigned Level 3.