Kodak 7520 - Manual (Page 65)

A-61140 January 2000 6-9
Code Message Displayed Description/Action Required
E295 Rr Cal Fail - calibration reqrd A calibration failure was detected in the rear scan
module. Press Cal to calibrate the scanner. If the
error persists, verify the optical path is free of
obstructions, clean the imaging guides and replace
the front and rear lamps.
E000 -
E666 various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.
E700 -
E799 various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.
E800 -
E899 various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.
E900 -
E999 various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.