Kodak 7520 - Manual (Page 103)

A-61140 January 2000 8-29
Vertical start print
position The vertical start print position is defined at installation and determines
how far the printed information will appear from the leading edge of the
document.
Leading edge (fed into transport first)
Vertical start print position
NOTE: Printing automatically stops ¼-inch (6.3 mm) from the trailing
edge of the document, even if the information has not been
completely printed.
Changing the vertical start print position
•
Use function code F46 to change the vertical start print position of
the front Document Printer.
•
Use function code F47 to change the vertical start print position of
the rear Document Printer.
To change the vertical start print position:
1. Enter function code F46 (front Document Printer) or F47 (rear
Document Printer).
2. Press Enter.
3. Enter a value between 0.125 to 30 inches (3 to 760 mm) for the
desired vertical start print position. The value should not exceed the
document length.
4. Press Enter.
D
P
1
T
E
S
T
Trailing edge