beautypg.com

Kodak 7520 User Manual

Page 8

background image

A-61140 January 2000

1-5

Rear View — Document Scanner 7520

COIN 1/3

COIN 2

SCSI connectors

Footswitch
connector

Serial #

Power switch

Power cord
connector

Footswitch connector — allows you to plug in the optional Footswitch
accessory.

Serial number — provides the serial number and agency approvals.

Power switch — toggle this switch to turn the power on (

|

) or off (O).

Power cord connector — plugs into an appropriate power outlet.

COIN 1/3 — service/diagnostic interface. Configures the scanner and
runs diagnostics.

COIN 2 — not for customer use.

SCSI connectors — SCSI connection for the scanner.

For European units only:

WARNING:

Communications between the Scanner 7520 and the
host computer including both the SCSI cable (TDK:
HF70RH26X29X13) and RS-232 cable
(TDK: HF70RH12X15X7.3) must have ferrite cores.
These ferrite-cored cables are used for radio
frequency interference suppression.