Konica Minolta BP-200 - Manual (Page 42)

Setup 2
200/250/350 2-9
Se
tu
p
Ch
apte
r 2
2.3 Basic Settings
Settings
Settings can be specified for the following.
DHCP
1
In the Network Setting screen, touch [Basic Settings].
2
Touch [DHCP].
Item Description
DHCP Specify whether to acquire an IP address automatically from the
DHCP server or use a fixed IP address.
IP Address Setting Set the machine’s IP address.
Specify when “DHCP” is set to “IP Input”.
Subnet Mask Enter the subnet mask of the network to be connected.
Specify when “IP Input” was selected in [DHCP].
Gateway Enter the gateway address of the network to be connected.
Specify when “DHCP” is set to “IP Input”.
Self-Domain Name Specify the domain name of this machine. Specify when per-
forming direct fax transmission over an e-mail server. For spec-
ifying the domain device settings, refer to the User’s Guide
[Facsimile Operations].
2
Note
To send a direct fax, the optional fax kit is required.
Network Board Set Specify the network board (LAN board) transmission speed.
Basic Settings
Enter Cancel
DHCP
IP Addres Setting
Subnet Mask
Gateway
IP Input
Self-Domain Name
Network Board Set Auto
. . .
. . .
. . .
100% Memory
Free