2 specifying the network settings, Network setting table, Specifying the network settings -4 – Konica Minolta BP-200 User Manual
Page 37: Network setting table -4
2
Setup
2-4
200/250/350
Se
tu
p
Ch
apte
r 2
2.2
Specifying the network settings
The operations that are available depend on the LAN environment of the ma-
chine.
Specify the network settings according to the LAN environment and the op-
eration to be performed.
!
Detail
Before specifying any settings, contact your network administrator for
the required information.
Specify the network settings in Administrator mode by using either this ma-
chine’s control panel or PageScope Web Connection. The setting procedure
using this machine’s control panel is described below.
To specify the settings using on PageScope Web Connection, refer to Chap-
ter 8, “Specifying settings using PageScope Web Connection” on page 8-2.
Network setting table
The network settings required for each operation are described below.
o
:
A setting is required.
+
:
A setting is required depending on the environment.
0
:
The parameter is available.
– :
The parameter is not available.
Operation
Parameter
Scan to
E-Mail
Scan to
FTP
Scan to
SMB
Scan to
HDD
Internet
faxing
Basic Settings
DHCP
+
+
+
+
+
IP Address Setting
o
o
o
o
o
Subnet Mask
o
o
o
o
o
Gateway
o
o
o
o
o
Self-Domain Name
–
–
–
–
–
Network Board Set
+
+
+
+
+
DNS Settings
YES/NO
+
+
+
+
+
Host Name
+
+
+
+
+
Domain Name
+
+
+
+
+
DNS Server Address
+
+
+
+
+