Konica Minolta BP-200 User Manual
Page 405
9
Specifying management settings
9-36
200/250/350
Spe
c
if
y
ing
ma
nag
eme
n
t s
e
tti
ng
s
Chap
ter
9
Specifying administrator forwarding settings (mode 198)
You can specify whether a received document is forwarded to a destination
specified by the administrator.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
(*) Bit 7 of mode 198 is enabled only when “1 (transmit)” is specified.
Bit
7 6 5 4 3 2 1 0
Setting
1 1 0 1 0 0 0 0 (HEX: D0)
Bit
Description
Setting
Description
Page Ref-
erence
7
Specifies whether a received
document is forwarded to a
destination specified by the
administrator.
0
Not forwarded
1
Forwarded
6
Specifies whether to enable
TX Forwarding when scan-
ning.(*)
0
Not forwarded
---------
1
Forwarded
5, 4
Specifies the print condi-
tions of transmission reports
for TX Forwarding.(*)
00
Not output
---------
01
Undeliverable
10
Always prints
11
*Do not specify these set-
tings.
3, 2, 1, 0
-----------------------------
0000
*Do not change these bits
when specifying settings for
this function.
---------