Konica Minolta BP-200 - Manual (Page 322)

Specifying settings using PageScope Web Connection 8
200/250/350 8-43
S
p
e
c
if
y
ing
se
tti
ngs
us
in
g P
age
Sc
op
e W
eb C
onne
ct
ion
Ch
apte
r 8
8.8 TX Settings (Administrator mode)
Default transmission settings can be specified.
Settings can be specified for the following.
Item Description
Quality/Mode
Default Quality Select the default quality setting that is specified after an operation is
complete.
Default Density Select the default density setting that is specified after an operation is
complete.
Com. Mode Select the default communication mode that is specified after an operation is
complete. Select “TX: PC (E-mail)” or “TX: Internet FAX”.
FAX Menu
TSI Select how the transmission source name is attached and the type of
transmission source information from 1 through 8.
Off: Select this setting to not attach the transmission source name.
Inside Body Text: Select this setting to print the transmission source name on
the original document.
Outside Body Text: Select this setting to not print the transmission source
name on the original document.
Rotation TX Specify whether to reset the rotation transmission after the operation is
complete.
2-Sided TX Specify whether to reset the double-sided transmission after the operation is
complete.
Original Bind
Direction If “2-Sided TX” was set to “On”, select from “Left Binding”, “Top Binding” or
“Auto” for the binding position of the document.