Konica Minolta BP-200 - Manual (Page 175)

4 Scan to FTP
4-28 200/250/350
Sc
an
to FTP
Ch
apte
r 4
Resending
You can resend up to 20 failed transmission.
1
Touch [Job List], then [Type], and then select the document that could
not be sent.
– If [Retry] and [Change Destination] appear in the screen, the docu-
ment does not need to be scanned again.
2
To send to the same destination, touch [Retry].
– To send to a different destination, touch [Change Destination].
4 Transmission result Shows the transmission result. Any of the
following may appear.
OK: The transmission was completed suc-
cessfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceed-
ed.
NG: The transmission failed.
PT. DEL: The transmission to some destina-
tions failed.
Error code: For details, refer to “Network er-
ror list” on page 11-3.
5 Transmission Image Prints a part of the sent image.
No. Item Description