Kodak A-41069 - Manual (Page 96)

8 - 5 A-41069 January 1993
Mounting
Bracket
Lens
DSA Window
Transport Window
6. Rotate the DSA assembly away from you. The mounting
brackets should be pointing straight down.
7. Set the DSA assembly down, using the mounting brackets for
support.
8. Wipe all exposed surfaces of the DSA assembly, including the DSA
window, lens, and transport window. Use a clean, dry, lint-free
cloth.
9. Lift the DSA assembly straight up from the transport area.
10. Rotate the DSA assembly toward you. The mounting brackets
should be pointing toward the back of the machine.
11. Replace the DSA assembly in its original position.
12. Push down and rotate the release handles inward so that they both
point toward the center of the transport to lock the DSA assembly in
place.
13. Close the front cover.
14. Turn the side panel switch on.