Kodak A-41069 - Manual (Page 29)

2 - 17 A-41069 January 1993
Batching A batch is defined as a specific number of documents of a given level
(Level 1, Level 2, or Level 3). Prior to processing, a predefined action
may take place. During processing, when the specified number of
documents of the given level have been processed, a predefined action
will take place.
The start-of-batch and end-of-batch actions are defined during
installation for each mode.
When batching is enabled in the current mode, a B will appear in the
first line of the status display.
The topics presented in this section apply to the general usage of the
Scanner.
Checking the meters is useful in determining:
• maintenance schedules.
• the length of time required to complete a job.
To view the run time display, enter Function Code F17. The display will
show three (3) meters: Meter A shows the number of motor-on hours;
Meter B shows the number of transport-on hours; and Meter C shows
the number of AC-on hours. Press the right arrow key to view each
meter in turn. In addition, the non-resettable document count is shown
as Meter D.
Press the Clear key to clear the display.
Batching indicator
0030.05.100.001 MODE 5 B
Please Wait...
Special considerations
Checking the meters
0030.05.100.001 MODE 5
Meter A: 10 ->