Kodak A-41069 - Manual (Page 40)

3 - 10 A-41069 January 1993
Changing the deflector The Scanner comes with two deflectors (stored in the pocket located
inside the right-side access door), designed to help stack the documents
as they exit the transport system and enter the exit hopper.
Use the short deflector for documents less than 5 inches (13 cm) and
the long deflector for documents longer than 5 inches (13 cm) as well as
for mixed sizes.
1. Grasp the deflector near the attachment pin (as shown).
2. Guide the deflector into the exit hopper, just below the lip of the
hopper, to insert the attachment pin in the holding clip.
3. Pull the deflector toward you until it clicks into place.