Kodak A-41069 - Manual (Page 84)

7 - 3 A-41069 January 1993
Clearing the document
path If a document becomes lodged in the Scanner transport system, the
system will stop running and a message will appear in the Status
Display.
A document can become lodged in the transport system when:
• Documents are not fed straight (skewed).
• Documents are torn, badly folded, or wrinkled.
• Staples and paper clips were not removed from documents.
• Imaging guides are not seated properly or are not installed.
• Transport system baffle plates are not firmly closed.
The document path can be cleared easily because:
• No tools are needed.
• Easy-access panels let you quickly locate and clear documents.
There are six (6) areas in the transport system where documents may
become lodged and need to be removed:
A The feeder/horizontal transport area
B The imaging guide area
C The lower roller assembly area
D The vertical transport area
E The upper turn area
F The document exit area
The document path