Kodak A-41069 - Manual (Page 17)

2 - 5 A-41069 January 1993
Once the desired alpha character appears in the display, it may be selected
for input into the Fixed Field. To input the desired alpha character, use the
left or right arrow key to move the flashing cursor over the desired alpha
character. Press Enter to place the alpha character in the Fixed Field.
Repeat the process of entering alpha entry mode, and entering an alpha
character for each Fixed Field character.
For example, if the current Image Address Fixed Field is 1201 and you
want to change it to DEC5, the following steps would be used:
• Enter Function Code F92.
The entry cursor will appear over the first Fixed Field character
(1201).
• Press the up or down arrow key to enter alpha entry mode.
• Make sure that the letter D is displayed. If not, press the up or down
arrow key until the letter is displayed.
• Use the left or right arrow key to position the flashing cursor over the
letter D.
• Press Enter to place the letter D in the first Fixed Field character
position. Only the letter D will appear in the display, with the entry
cursor appearing in the next character position.
• Press the up or down arrow key to enter alpha entry mode.
• Make sure that the letter E is displayed. If not, press the up or down
arrow key until the letter is displayed.
• Use the left or right arrow key to position the flashing cursor over the
letter E.
• Press Enter to place the letter E in the second Fixed Field character
position. The letters DE will appear in the display, with the entry
cursor appearing in the next character position.
• Press the up or down arrow key to enter alpha entry mode.
• Make sure that the letter C is displayed. If not, press the up or down
arrow key until the letter is displayed.
• Use the left or right arrow key to position the flashing cursor over the
letter C.
• Press Enter to place the letter C in the third Fixed Field character
position. The letters DEC will appear in the display, with the entry
cursor appearing in the next character position.
• Press the numeric key 5 to place the number 5 in the fourth Fixed
Field character position.
• Press Enter to exit Function Code F92. saving the changes to the
Image Address and return to a normal operating display.