Kodak A-41069 - Manual (Page 36)

3 - 6 A-41069 January 1993
10. When you have adjusted the gap so that the bottom document
separates consistently from the top document, rotate the Gap
Adjustment Knob counterclockwise another one or two clicks to
complete the adjustment.
11. Feed a stack of fifty (50) to one-hundred (100) documents twice
through the transport system. Verify that the final count reflects the
total number of documents that were fed and that the counter shows
the same amount each time the documents are counted.
If the count is not the same, the gap is not adjusted correctly. Rotate
the Gap Adjustment Knob counterclockwise another one or two
clicks and repeat Step 10. Repeat until corrected.
12. Press Stop.
13. Enter Function Code F04 and disable counting-only.
14. Press Enter.