Kodak A-41069 - Manual (Page 85)

7 - 4 A-41069 January 1993
• Check each transport area, in turn (Area A through Area F), for
documents lodged in the document path. You only have to remove the
jammed document(s). The jog feature places the rest of the
documents
in the exit hopper. Make certain that all operator accessible areas are
firmly closed and all baffle plates are locked into place.
• Press and hold down the JOG key to clear any remaining documents.
• Collect the documents located in the transport system. Put them back
into their original order, if necessary.
• Reset the Image Address, Level, etc., if necessary.
• Rescan the documents. If an error code appears in the Status
Display, check each transport area again to make certain that all
documents have been cleared.
NOTE: Green labels on handles designate operator accessible areas.
Clearing documents