Sun Microsystems Sun StorEdge T3 - Manual (Page 82)

70 Sun StorEdge T3 and T3+ Array Configuration Guide • August 2001
reverse address
resolution protocol
(RARP) A utility in the Solaris operating environment that enables automatic
assignment of the array IP address from the host.
S
SC An industry standard name used to describe a connector standard.
Simple Network
Management Protocol
(SNMP) A network management protocol designed to give a user the capability to
remotely manage a computer network.
small form factor
(SFF) An industry standard describing a type of connector. An LC-SFF connector is
used for the host FC-AL connection to the Sun StorEdge T3+ array.
synchronous dynamic
random access memory
(SDRAM) A form of dynamic random access memory (DRAM) that can run at higher
clock speeds than conventional DRAM.
system area Located on the disk drive label, the space that contains configuration data, boot
firmware, and file-system information.
U
uninterruptable power
source (UPS) A component within the power and cooling unit. It supplies power from a
battery in the case of an AC power failure.
V
volume Also called a logical unit or LUN, a volume is one or more drives that can be
grouped into a unit for data storage.