Sun Microsystems Sun StorEdge T3 - Manual (Page 64)

52 Sun StorEdge T3 and T3+ Array Configuration Guide • August 2001
Sun Enterprise SBus+ and Graphics+
I/O Boards
The SBus+ and Graphics+ I/O boards each provide mounting for two Gigabit
Interface Converters (GBICs). For more detailed information about these I/O boards,
refer to the Sun Enterprise 6x00/5x00/4x00/3x00 Systems SBus+ and Graphics+ I/O
Boards Installation Guide, part number 805-2704.
FIGURE 5-1 shows an Enterprise
6x00/5x00/4x00/3x00 SBus+ I/O board.
FIGURE 5-1 Sun Enterprise 6x00/5x00/4x00/3x00 SBus+ I/O Board
System Requirements
Your system must meet the following hardware and software requirements:
■ Sun Enterprise 6x00/5x00/4x00/3x00 system
■ An available I/O board slot
■ OpenBoot TM PROM, version 3.2.10 or later
■ A release of the Solaris operating environment that supports this board. The first
release that supports this board is the Solaris 2.6 operating environment.