Sun Microsystems Sun StorEdge T3 - Manual (Page 65)

Chapter 5 Host Connections 53
Sun StorEdge PCI FC-100 Host Bus
Adapter
The Sun StorEdge PCI FC-100 host bus adapter is a 33-MHz, 100 Mbytes/second,
single-loop Fibre Channel PCI host bus adapter with an onboard GBIC. This host bus
adapter is PCI Version 2.1-compliant. For more detailed information about this
product, refer to the Sun StorEdge PCI FC-100 Host Adapter Installation Manual, part
number 805-3682.
FIGURE 5-2 shows a Sun StorEdge PCI FC-100 host bus adapter.
FIGURE 5-2 Sun StorEdge PCI FC-100 Host Bus Adapter
System Requirements
Your system must meet the following hardware and software requirements:
■ An available PCI port
■ A release of the Solaris operating environment that supports this board. The first
release that supports this board is the Solaris 2.6 operating environment