Sun Microsystems Sun StorEdge T3 - Manual (Page 13)

1
C H A P T E R
1
Array Configuration Overview
This chapter describes the Sun StorEdge T3 and T3+ arrays, the connection ports,
and Fibre Channel connections. It also describes basic rules and recommendations
for configuring the array, and it lists supported hardware and software platforms.
Note – For installation and cabling information, refer to the Sun StorEdge T3 and T3+
Array Installation, Operation, and Service Manual. For software configuration
information, refer to the Sun StorEdge T3 and T3+ Array Administrator’s Guide.
This chapter is organized as follows:
■ “Product Description” on page 1
■ “Configuration Guidelines and Restrictions” on page 8
■ “Configuration Recommendations” on page 9
■ “Supported Platforms” on page 9
■ “Sun Cluster Support” on page 10.
Product Description
The Sun StorEdge T3 array is a high-performance, modular, scalable storage device
that contains an internal RAID controller and nine disk drives with Fibre Channel
connectivity to the data host. Extensive reliability, availability, and serviceability (RAS)
features include redundant components, notification of failed components, and the
ability to replace components while the unit is online. The Sun StorEdge T3+ array
provides the same features as the Sun StorEdge T3 array, and includes an updated
controller card with direct fiber-optic connectivity and additional memory for data
cache. The controller cards of both array models are described in more detail later in
this chapter.