Sun Microsystems 3U User Manual
Page 98
76
SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001
The following examples show the
atmconfig
and
laneconfig
files and the
ifconfig -a
output for a system with one physical interface,
ba0
. That interface
runs both Classical IP and LAN Emulation under UNI 3.1, and has 4 different IP
addresses. Configure the hostnames,
cip0
,
atm0
,
atm1
, and
atm2
, appropriately in
/etc/hosts
.
The example
/etc/opt/SUNWconn/atm/atmconfig
file:
The corresponding example
/etc/opt/SUNWconn/atm/laneconfig
file:
The resulting
ifconfig -a
output:
Interface UNI
CIP Hostname LANE Instance
LANE Hostname
ba0 3.1
cip0 0
atm0
ba0 -
- 0:1
atm1
ba0 -
- 0:2
atm2
Interface MAC Address/ ATM Address VCI Flag
ELAN Name
lane0 - $myaddress - l
# ifconfig -a
lo0: flags=1000849
inet 127.0.0.1 netmask ff000000
ba0: flags=1000843
inet 192.29.235.36 netmask ffffff00 broadcast 192.29.235.255
ether 8:0:20:7a:37:af
lane0: flags=1000843
inet 192.29.240.36 netmask ffffff00 broadcast 192.29.240.255
ether 8:0:20:8b:6d:d0
lane0:1: flags=1000843
inet 192.29.241.36 netmask ffffff00 broadcast 192.29.241.255
lane0:2: flags=1000843
inet 192.29.242.36 netmask ffffff00 broadcast 192.29.242.255