Sun Microsystems 3U - Manual (Page 31)

Chapter 2 Installing the SunATM Software 9
Configuring the SunATM Interfaces
After installing the SunATM software, you must configure the SunATM interfaces
before you reboot your system. You can either use the SunATM configuration
program,
atmadmin , to configure the interfaces, or you can edit the SunATM
configuration files directly.
Note – If you are installing the adapter in a hot swap environment do not reboot
your system.
See Chapter 4 for instructions on how to use the atmadmin program, and see
Chapter 5 for information about how to edit the SunATM configuration files.