Atmadmin parameter groups, Atmadmin – Sun Microsystems 3U User Manual
Page 50
28
SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001
atmadmin
Parameter Groups
The
atmadmin
configuration program contains a series of menus where you can
input or alter the configuration of specific SunATM software parameters.
summarizes the configurable parameters in each parameter group.
Although the parameter list appears lengthy, you need only the default values for
most standard configurations. The large number of parameters offer the flexibility to
support special-case configurations and to allow interoperability with equipment
from other vendors.
Note –
In most cases, you need to configure only the parameters that do not have
default values.
TABLE 4-2
Configurable Parameters in the SunATM Software
Group
Parameters
Possible Values
Default Values
Required?
System
SNMP agent status
agent
or
not_agent
not_agent
Yes
SNMP agent UDP
port
0<= n <= 65355
1000
For SNMP
agent
Physical layer
Framing interface
SONET or SDH
SONET
Yes
Signalling
UNI version
3.0, 3.1, 4.0, or none
No default
Yes
ILMI
ILMI status
Enabled or Disabled
Enabled
Yes
Classical IP
Hostname/IP address
Valid hostname and
IP address
No default
For Classical IP
Interface Type
Client, server, or
Standalone
No default
For Classical IP
Local ATM address
Valid ATM address
$myaddress
For Classical IP
clients or
servers
ARP server
Valid ATM address
$localswitch_se
rver
For Classical IP
clients
PVC
32 <= n < 1024
32
For Classical IP
standalones
Destination hostname
or IP address
Valid hostname and
IP address
No default
For Classical IP
standalones
LAN emulation
Instance number
0 <= n <= 999
No default
For LAN
emulation