Sun Microsystems 3U - Manual (Page 81)

Chapter 5 Editing SunATM Configuration Files 59
The corresponding example /etc/opt/SUNWconn/atm/laneconfig file:
The resulting ifconfig -a output:
Interface MAC Address/ ATM Address VCI Flag
ELAN Name
lane0 - $myaddress - l
lane1 - $myaddress - l
lane1 elan1 - - n
lane2 - $myaddress - l
lane2 elan2 - - n
lane3 - $myaddress - l
lane3 elan3 - - n
# ifconfig -a
lo0: flags=849 mtu 8232
inet 127.0.0.1 netmask ff000000
lane0:flags=863 mtu 1500
inet 192.29.240.36 netmask ffffff00 broadcast 192.29.240.255
ether 8:0:20:7a:37:af
lane1:flags=863 mtu 1500
inet 192.29.241.36 netmask ffffff00 broadcast 192.29.241.255
ether 8:0:20:7a:37:b0
lane2:flags=863 mtu 1500
inet 192.29.242.36 netmask ffffff00 broadcast 192.29.242.255
ether 8:0:20:7a:37:b1
lane3:flags=863 mtu 1500
inet 192.29.243.36 netmask ffffff00 broadcast 192.29.243.255
ether 8:0:20:7a:37:b2