Sun Microsystems 3U - Manual (Page 47)

Chapter 4 Configuring the SunATM Interfaces 25
atmadmin Main Menu
After you start the atmadmin configuration program, you see the atmadmin Main
Menu. From this menu, you can either go to the system parameter group menu (see
“System Parameter Group Menu” on page 26) or enter the SunATM interface you
want to configure. The following screen example is from a system with one interface
named
ba0 .
After selecting an interface, you will see the Interface Configuration menu (see
“Interface Configuration Menu” on page 27).
atmadmin Navigation Commands
TABLE 4-1 lists the basic commands that let you navigate through the menu hierarchy.
Welcome to the SunATM Admin Program.
The following interfaces are installed in your system:
ba0
[S] Modify System Parameters
[X] Exit
[?] Help
Enter interface name or option: ba0
TABLE 4-1 Basic Navigation Commands in atmadmin
Command Action
m Return to the atmadmin main menu
p Return to the previous menu
x Exit atmadmin
? Provide more information about the options on this menu