Siemens SpeedStream SS2524 - Manual (Page 8)

SpeedStream Powerline Wireless Router User Guide
4
Physical Details
Front Panel LEDs
Figure 2: Front Panel
Power On - Normal operation.
Off - No power
Status On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up, or when the Firmware is
being upgraded.
LAN
(1, 2, 3, 4)
For each LAN port, there are 2 LEDs
•
Link/Act
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub)
port.
•
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
•
100
•
On - Corresponding LAN (hub) port is using 100BaseT.
•
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN Flashing - data is being transmitted or received via the WAN port.
Off - no data is being transferred.
Wireless On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
Powerline On - Powerline connection is available.
Off - No Powerline connection available.
Flashing - Data is being transmitted or received via the Powerline inter-
face. Data includes "network traffic" as well as user data.