Siemens SpeedStream SS2524 - Manual (Page 40)

SpeedStream Powerline Wireless Router User Guide
36
Figure 23: TCP/IP Properties (Windows XP)
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the SpeedStream Powerline Wireless
Router.
Using a fixed IP Address ("Use the following IP Address")
•
If your PC is already configured, do NOT change the settings on the screen shown in
Figure 23 above, unless advised to do so by your network administrator.
•
You can enter the SpeedStream Powerline Wireless Router's IP address in the Default
gateway field and click OK. Your LAN administrator can advise you of the IP Address
they assigned to the SpeedStream Powerline Wireless Router.
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.