Siemens SpeedStream SS2524 - Manual (Page 28)

SpeedStream Powerline Wireless Router User Guide
24
Figure 9: Powerline Screen
Data - Powerline Screen
Powerline Data Encryption
Password The Powerline Network Password must be set to match other devices
on your Powerline network to allow them to communicate with one
another.
The default value is SpeedStream
Other Stations This feature allows you to assign the Powerline Network Password to
other Powerline stations on your LAN. Each Powerline station must be
identified by its Default Passcode, usually indicated by a sticker on
the bottom or back side of the Powerline device. Other Powerline
devices must be connected to your powerline network and functioning
properly before their network password can be reset using this func-
tion.
•
Default Passcode - To add a station to the list, enter its Default
Passcode in this field, and click the Add to List button.
•
Delete Button - Clicking this will delete selected stations from the
list.
•
Set Network Password Button - Clicking this will assign the
current Powerline Network Password to all selected stations. You
can select multiple stations by holding the CTRL key while select-
ing. (On the Macintosh, use SHIFT instead of CTRL.)