Label dispenser installation – SATO CL 408e User Manual
Page 165
Page 9-11
Section 9. Optional Accessories
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. B
Fig. 9-19
Fig. 9-18
REMOVE THE CONNECTOR
COVER (IF INSTALLED)
INSTALL CABLE IN
SLOT (CONNECTOR
IS KEYED)
ATTACH BY SLIDING THE
SLOTTED OPENINGS
OVER THE PAN HEAD SCREWS
Installing the Peel Bar will allow different types of material to dispense properly.
PEEL BAR
Fig. 9-20
EXISTING RIBBON
TENSION PLATE
Label Dispenser Installation
This manual is related to the following products: