SATO CL 408e - Manual (Page 163)

Page 9-9
Section 9. Optional Accessories
SATO CL408e/CL412e Service Manual PN 9001078
Rev. B
REMOVE AND RETAIN
(4) SCREWS
Fig. 9-14
ACCESS
PLATE
Fig. 9-12
Fig. 9-13 LOOSEN (4) SCREWS
HOLDING STEPPER
MOTOR
INSTALL BELT FROM
SPINDLE ASSEMBLY
STEPPER MOTOR
BELT TO FRONT
PLATEN
Fig. 9-15
GENTLY GUIDE THE SPINDLE ASSEMBLY
THROUGH THE ACCESS OPENING,
ORIENTING THE UNIT SO THAT THE
BRACKET LEGS WHICH ATTACH TO THE
PLATE ARE TO THE TOP AND TO THE
RIGHT. THE BELT WILL EXIT FROM THE
BRACKET ON THE LEFT SIDE
MECHANICAL
SECTION
PLATE
THE BRACKET LEGS,
WHICH ATTACH TO THE
PLATE ARE ORIENTED
ON TOP AND TO THE
RIGHT
Label Dispenser Installation