beautypg.com

Snmp configuration with traps enabled, Get and set community names, Ip address for traps – Siemens PSFR-CP41 User Manual

Page 55: Trap priority

background image

Operating Manual

U42093-J-Z716-1-74

SNMP Configuration with Traps Enabled

Configuring the PSFR-CP41

SNMP Configuration with Traps Enabled

GET and SET Community Names

The SNMP GET community name is checked for each GET request received by
the PSFR-CP41. The community name in the SNMP packet must match the
community name configured here for the SNMP GET request to be successfully
completed. Configure your SNMP manager to have the same GET and SET
community names as the PSFR-CP41.

IP Address for Traps

The Trap Manager IP address is the address used for sending Traps. Typically,
this is the IP address of the machine using the Network Management Program
and/or a MIB browser.

Trap Priority

The SNMP Trap Priority determines which traps will be sent to the specified Trap
IP Address. Events having a priority equal to or higher than the configured
priority will be sent first.