Siemens PSFR-CP41 - Manual (Page 25)

Operating Manual U42093-J-Z716-1-74
Mounting the PSFR-CP41 in a Rack Installing the PSFR-CP41
SCSI terminator
6. Power on your SCSI devices.
7. After all the SCSI devices have completed their individual POSTs, power on
the PSFR-CP41.
Ethernet Connection
10BaseT Ethernet connectivity is used to provide enhanced management and
configuration capabilities. The RJ-45 connector on the unit can be directly
connected to a standard 10BaseT Ethernet network.
You must first set the network address via the serial port to use the configuration
capabilities of the Ethernet port. Refer to Chapter “Configuring the PSFR-CP41”
for details on setting the network address.
Ethernet capabilities include Telnet and HTTP Interface (Web Browser) for
configuration, FTP and TFTP for firmware upgrades, and SNMP for configu-
ration and management.
5. Make sure the bus is terminated
correctly. The devices at each end
of the bus must be terminated.