Siemens PSFR-CP41 - Manual (Page 43)

Operating Manual U42093-J-Z716-1-74
Setting Up Serial Port Communications Configuring the PSFR-CP41
Setting Up Serial Port Communications
Leave the PSFR-CP41 turned off until you have set up serial port communica-
tions with your host computer.
To set up serial communications with the PSFR-CP41:
1. Plug the serial cable provided with the PSFR-CP41 into one of your
computer’s serial ports (for example, COM1 or COM2) and the PSFR-
CP41’s serial port.
2. Start your terminal interface program.
3. Set the terminal interface program to use the appropriate COM port.
4. Specify the following settings for the port:
Before powering on the PSFR-CP41, make sure all the devices on the
SCSI bus are powered on and have finished performing their self tests.
The devices on your Fibre Channel Storage Area Network should be
powered on also.
5. Power on the PSFR-CP41.
Baud rate: 9600, 19200, 38400, 57600, or 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
i